Stone Protector – Water Based Sealer

Stone Protector – Water Based Sealer

£31.40£101.40 ex VAT


Added to Favourites

SKU: N/A Category:


Stone Protector – Water Based

A water-based penetrating stone sealer designed to protect stone surfaces from staining.

  • Exclusive water-based fluoropolymer nano‐technology.
  • Use with granite, marble, quartzite, travertine, limestone, quartz and much more.
  • Allows for easier cleaning.
  • Ultimate penetrating protection against staining.
  • Interior and Exterior applications.
  • Will not change the appearance of the stone.
  • Clear liquid, fresh scent, easy to use.
  • Water-Based.
  • VOC Compliant.

Available in two sizes 946ml and 3.79L.

Please click on the link below to download the Safety Data Sheet (SDS) for this product.

All our Stone Care products have their own unique QR code printed on them, for easy access to correct application methods and Safety Data Sheet (SDS).

SSPW0946 SSPW3790


Low Porosity – 111-149m² per 3.79L / 1200-1600 ft² per US gal – Ex: granite, quartzite, engineered quartz.

Medium Porosity – 93-111m² per 3.79L / 1000-1200 ft² per US gal – Ex: slate, onyx, soapstone.

High Porosity – 74-93m² per 3.70L / 800-1000 ft² per US gal – Ex: marble, limestone and travertine.

Coverage numbers are estimates only and may vary due to stone porosity and surface finish eg honed, polished, textured etc.  Second application covers approximately double the first.  Always pre-test product in an inconspicuous area to determine desired results.


Directions for use:

  • Read the Safety Data Sheet (SDS) completely before use.
  • All surfaces must be thoroughly cleaned and dried.
  • Apply Stone Protector with spray, brush or roller.
  • Allow Stone Protector to soak into stone surface for 30 minutes.
  • Some stones are more porous than others. If Stone Protector penetrates within 15 minutes multiple applications are necessary. Repeat this process until Stone Protector remains “wet” after 30 minutes.
  • If the stone surface is still “wet” after 30 minutes, remove excess with a dry cloth or towel.
  • If a light haze or residue remains after drying, it may be removed by moistening a clean cloth or towel with Stone Protector (S) and gently wiping the surface clean.
  • Allow 24 hours for complete curing. During this time, keep surface free of all potential staining materials.
  • No two stone surfaces are alike. When properly applied, Stone Protector will protect for several years, but some heavy use areas can benefit from multiple applications throughout the year.

WARNING: Stone Protector is most effective against staining, however it will not protect against etching caused by acidic substances such as wine, lemon and household detergents/cleaners. To minimise risk of damage, always wipe up spills as quickly as possible.